Why Chill Out is Considered the Best Alternative to Hydronic Radiant Floor Heating
The main reason is the cost to purchase and how complex it can be to install.
To illustrate, here’s a list of parts needed to install Chill Out Radiant Heat.
- Transformer
- Heating element
- Clips, seal tape for clips.
- Roll of 14ga. Stranded wire.
- 120v electric line.
Here’s a list of parts needed to install Hydronic Radiant Floor Heat:
- Boiler
- Expansion tank
- Waterline
- 120v electric line
- Fill valve
- Return temp sensor
- 4- way mixing valve
- Supply temperature sensor
- Supply manifold
- Return manifold
- Flow check valves
- Pex tubing
- Clips for pex tubing
- System controls
- Thermostat
- Gallons of glycol
- Pipes to connect the boiler to manifolds
- Water shut off valves
- And a few other parts that may be needed.
Chill Out is the best alternative to hydronic radiant floor heating!
The installation of a Hydronic radiant floor heating system must be done by an expert.
There are too many problems that will develop if you try this yourself.
The cost to install is about $20 per square foot.
Ultimately, Chill Out Radiant Heat is an affordable and easy-to-install alternative to hydronic radiant floor heating.
Interested in our product? Contact us today, for a free sample! We encourage you to reach out and ask us any questions you may have.